Carbon Dioxide Adsorbers VCD-SERIES
The VCD-Series carbon dioxide adsorbers are designed to remove CO2 from compressed air. The carbon dioxide adsorber does this by using media beds featuring 13X molecular sieve in a pressure swing adsorption process. Adsorbed moisture and CO2 are vented to atmosphere while dry CO2-free air is provided at the outlet port. Standard voltage is 115 VAC. 230 VAC is available. Standard operating pressures from 50 to 150 psig.
VCD Carbon Dioxide Adsorber Features:
• Outlet CO2 content to less than 1 PPM
• Outlet H2O content to less than 1 PPM ( -100°F dew point)
• Compact and lightweight design requires less space
• Standard solid state timer with built-in memory for energy savings
• NEMA 1 Electricals
• Standard purge mufflers and power cord.
Typical CO2-Free Air Applications:
• TOC Analyzers
• Continuous Emissions Monitoring Systems
• Environmental Instruments
• FTIR Spectrometers
• Gas Chromatographs
• Laboratory Analyzers
Specifications
VCD-SERIES CO2 ADSORBER SPECIFICATIONS Outlet Flow Capacities at Various Operating Pressures | |||||||||||
| MODEL | OUTLET FLOW (liters/minute) | ||||||||||
| VCD3 | 5 | 9 | 13 | 15 | 19 | 23 | 25 | 30 | 33 | 35 | 38 |
| VCD4 | 16 | 26 | 33 | 37 | 48 | 60 | 65 | 73 | 85 | 93 | 99 |
| PSIG | 50* | 60* | 70* | 80 | 90 | 100 | 110 | 120* | 130* | 140* | 150* |
| * factory selected purge orifice installed for these pressures | |||||||||||
| MODEL | VCD3 | VCD4 |
| Flows at 100 PSIG (liters/minute) | ||
| Inlet Flow | 40 | 95 |
| Purge Flow | 17 | 35 |
| Outlet Flow | 23 | 60 |
| Connections (NPT) | ||
| Inlet | 1/4" | 1/4" |
| Outlet | 1/4" | 1/4" |
| Dimensions (Inches) | ||
| Height | 16.1 | 24.1 |
| Width | 8 | 8 |
| Length | 4.8 | 4.8 |
| Weight (Pounds) | 9 | 14 |
| All Models: | ||
| • Power requirement: 115/1/50/60 or 220/1/50/60, 20 watts • Maximum temperature 120°F ambient • Maximum pressure 150 PSIG • Outlet CO2 concentration: less than 1 PPM • Outlet H2O concentration less than 1 PPM (-100°F dew point)
Recommended filtration on inlet: • Lubricated Compressor: 5.0 Micron filter and 0.01 Micron filter • Non-lubricated Compressor: 5.0 Micron filter | ||
Dimensions
VCD-SERIES CO2 ADSORBER/DRYER DIMENSIONS | |||
| MODEL | "A" | IN AND OUT PORTS | WT |
| VCD3 | 16.1 | 1/4" NPT | 9 |
| VCD4 | 24.1 | 1/4" NPT | 14 |
| dimension "A" in inches; weight in pounds | |||
source :airdryers.com and to see your complete